Infrared heaters are currently recognized as some of the most energy-saving electrical devices. The secret of their great efficiency is how they transmit heat, by using infrared rays.
"LUX" infrared heating units have a modern design: the smart reinforced body casing, made from an aluminium alloy dyed with powder enamels. It is small in size, ingeniously simple to install and comes equipped with an original wide-angle heat-emitting panel… these and many other outstanding features have now made "LUX" the number one brand name in its category.
||Panel size cm
|| Heated area
||80 x 12 x 5 cm
|| 8 m2
||104 x 12 x 5 cm
|| 12 m2
||128 x 12 x 5 cm
|| 16 m2
||153 x 12 x 5 cm
|| 20 m2
||172 x 12 x 5 cm
|| 26 m2
LUX infrared heating units are intended for ceilings or high on the wall. Overhead installation makes best use of their unique oval profile plus the 120° curve of the heat-emitting panel evenly heats up the entire room. This setup is not just the most efficient but it also saves valuable space; with the unit hung below the ceiling you are free to arrange everything in the room as your heart desires. The positioning of the unit should be carefully considered prior to installation in order to ensure the maximum coverage of the room’s surfaces. There are two options of fixings: chains which come free with purchase or rotating hangars that allow the panel to be hung on the wall and angled down. These should be purchased extra in the accessories.
A – distance from the ceiling may not be less than 100 mm
B – distance from the walls may not be less than 200 mm
C – distance between the unit and the objects located within the heater’s radiation, not be less than 250 mm
L – PION model types allow for the distance between the chains (fittings) to be regulated by manual adjustment
H – minimal required height for mounting:
5 years warranty.