Infrared Commercial Heaters. T2-series Industrial Heaters. For premises with large volumes and high ceilings.
For premises with large volumes and high ceilings
Recommended installation height 4 - 10 m
IR is suitable for total or supplementary heating of premises with large volumes and high ceilings. It can also be used outdoors for example on sport arena stands or to keep loading bays dry and frostless. Heaters used outdoors should be placed under a roof.
IR has a robust industrial design.
Powerful three-phase models are used for heating industrial and warehouse premises, workshops, hangars, exhibition and sports halls, and construction sites.
Reflectors of shiny anodized aluminum for optimal heat distribution.
The mounting brackets allow the heater to be angled in a different position.
The IR heater can be mounted in an angeled position to direct the heating where it is needed.
T-series infrared heaters are powerful infrared heaters with an open heating element for directed heating in any conditions.
T-series is effective even at low temperatures and in the wind.
Reliable high-temperature heating element.
Effective even at low temperatures and in the wind!
The possibility of spot heating;
They emit thermal energy in the infrared spectrum. Heat is practically not absorbed by the air and without loss reaches the heated surfaces, which, in turn, heat the air.
|Watts||Panel size cm||IP||Volt|
|1500W||120cm x 14cm x 10cm, 6kg||IP54||220-240V|
|4500W||120cm x 40cm x 10cm, 14kg||IP54||415V|
2 years warranty.