Aster Infrared Thermal Wave Panel – Hybrid Heater with Built-in WiFi Thermostat & Remote - White (600W–1350W)

Aster Range

Infrared Thermal Wave Panel (TWP) with Built-in Wifi Thermostat and Remote Control

Available in 600W, 900W, and 1350W models

The Aster Range combines the advantages of infrared heating with natural air convection for faster and more efficient warmth. Thanks to its hybrid technology, these panels can reduce energy consumption by up to 15–30%, delivering both directional heat and warm air circulation. The result is a quick, cost-effective heating solution ideal for modern spaces.

Why Choose the Infrared Thermal Wave Heater?

Thermal Wave Panels are suitable for both primary and supplemental heating. With a programmable thermostat, users can fine-tune energy usage for maximum comfort and efficiency. These panels are maintenance-free, environmentally friendly, and sized perfectly for discreet installation, such as under windows or along low walls.

Features & Benefits

• Hybrid infrared + passive convection heating system
• Built- in Wifi Thermostat and Remote Control
• Simple plug-and-play setup with 1.7-meter power cable and UK 3-pin plug
• Automatically maintains room temperature with energy-saving on/off cycling
• Supplied with all required mounting brackets and screws (Optional feet for a freestanding heater)
• Compact design ideal for residential or commercial use
• Surface temperature up to 110°C
• Certified by European Safety and TÜV standards
• Backed by a 5-year gold warranty

Installation Guidance

For optimal performance, avoid placing the panel directly facing windows or doors. Instead, orient the heater into the room so walls, furniture, and floors can absorb and radiate the infrared warmth, creating a consistent and comfortable indoor climate. A minimum 10cm gap from the edge of the panel to any furniture or walls is required. The Aster heater has a rating of IPXO, so it must be installed outside of any splash zones.

Remote Control Setup

IMPORTANT! In order to be able to use the heater, you need to set up the remote control.
The remote control acts as the thermostat for the heater. You can place the remote control wherever you would choose to measure the temperature.
Once the remote control has been setup, you can control the heater from that device, or pair your phone app "Smart Life - Smart Living" with the heater, if that is your preference.

1. Insert the batteries into the remote control, or plug in the USB-C cable. (Do not insert any batteries if the cable is in use)
2. Turn the remote control off.
3. Long press the menu (right) and up buttons at the same time to enter the "b" mode.
3. Use the menu (right) button to find the "b3" mode.
4. Turn on the WiFi module on the back of the heater.
5. In the "b3" mode, repeatedly tap the "up" button until '55' appears.
The heater and remote control are now connected. The heater is now fully operational and can be paired with your phone app for convenience.